home > knowledge > interfaces

go back

Schnittstellen

ANALOG-I/O

Analog interface for voltage/current setting and monitoring, INHIBIT / ON, REMOTE. 0-5V and 0-10V versions are available, mostly via electrically isolated DSUB-9 connector. Function and pin assignment are device dependend.

SPS

Industry standard 24V / 0-10V analog interface with separated connectors for digital and analog signals.

CAN

Controller Area Network. Digital serial bus interface, terminated with 120 Ω on each end. iseg´s standard system for bus connected modular systems.

USB

Universal serial bus interface for direct device communication.

RS232

Digital serial interface, typically on a DSUB-9 connector.

ETHERNET

Standard network connection usable in Ethernet infrastructures. Depending on device or control system different protocols and services are available: SNMP, SCPI, EPICS, HTTP (Browser, SOAP, Websocket), OPC, OPC-U/A.

IEEE 488

8-bit parallel bus standard. Also known as GPIB (general purpose interface bus).

VMEbus

Bus standard in VME system. Connected via module connector to VME-crate.