Bit addressing crate items
Control bits
- Control:29 - do set legacy mode enabled 1
- Control:28 - set legacy mode enabled 1
- Control:27 - do set high voltage backplane automatic on 1
- Control:26 - set high voltage backplane automatic on 1
- Control:25 - do set crate enable active 1
- Control:24 - set crate enable active 1
- Control:1 - do clear statistic 1
- Control:0 - do clear all events
More information can be found in the document: CAN_EDCP_Programmers_Guide.pdf
Status bits
- Status:21 - crate fast off 1
- Status:20 - crate enabled 1
- Status:19 - shut down 1
- Status:18 - high voltage on 1
- Status:17 - power fail
- Status:16 - power on
- Status:12 - sum error 1
- Status:11 - high +3.3 crate controller 1
- Status:10 - low +3.3 crate controller 1
- Status:9 - high +5 crate controller 1
- Status:8 - low +5 crate controller 1
- Status:7 - high temperature
- Status:6 - service 1
- Status:5 - high +24 backplane
- Status:4 - low +24 backplane
- Status:3 - high +5 backplane
- Status:2 - low +5 backplane
- Status:1 - high +24 battery
- Status:0 - low +24 battery
More information can be found in the document: CAN_EDCP_Programmers_Guide.pdf
Event status bits
- EventStatus:19 - event shut down 1
- EventStatus:18 - event high voltage on 1
- EventStatus:17 - event power fail
- EventStatus:16 - event power on
- EventStatus:11 - event high +3.3 crate controller 1
- EventStatus:10 - event low +3.3 crate controller 1
- EventStatus:9 - event high +5 crate controller 1
- EventStatus:8 - event low +5 crate controller 1
- EventStatus:7 - event high temperature
- EventStatus:6 - event service 1
- EventStatus:5 - event high +24 backplane
- EventStatus:4 - event low +24 backplane
- EventStatus:3 - event high +5 backplane
- EventStatus:2 - event low +5 backplane
- EventStatus:1 - event high +24 battery
- EventStatus:0 - event low +24 battery
More information can be found in the document: CAN_EDCP_Programmers_Guide.pdf
Event mask bits
- EventMask:19 - mask event shut down 1
- EventMask:18 - mask event high voltage on 1
- EventMask:17 - mask event power fail 1
- EventMask:16 - mask event power on 1
- EventMask:11 - mask event high +3.3 crate controller 1
- EventMask:10 - mask event low +3.3 crate controller 1
- EventMask:9 - mask event high +5 crate controller 1
- EventMask:8 - mask event low +5 crate controller 1
- EventMask:7 - mask event high temperature 1
- EventMask:6 - mask event service 1
- EventMask:5 - mask event high +24 backplane 1
- EventMask:4 - mask event low +24 backplane 1
- EventMask:3 - mask event high +5 backplane 1
- EventMask:2 - mask event low +5 backplane 1
- EventMask:1 - mask event high +24 battery 1
- EventMask:0 - mask event low +24 battery 1
More information can be found in the document: CAN_EDCP_Programmers_Guide.pdf
1 CC24/CC23/CC44/CC43 only