ATTENTION
An update of the device firmware is generally done at your own risk.
Please read the following instructions carefully. If you have any
questions or encounter problems, contact the iseg support at support@iseg-hv.de
Please make sure to update the module and crate controller firmware
to the recommended version before you update the iCS
system. You can find a list in file
iseg_firmware_compatibility_list_DATE.pdf which is part of
isegUpdate_DATE_firmware_complete.zip. (https://iseg-hv.com/download/?dir=SOFTWARE/iCS/)
Instructions
- If the iCS already has version 2.6 or higher, please follow the
steps under 1.
- If the iCS version is 2.5, please follow the steps under 2.
- If the iCS version is greater than or equal 2.4.1 but lower than
2.5.0, please follow the steps under 3.
- Otherwise, please have a look at 4.
1. System update
from version 2.6.x or higher
The is performed without any specifics in the usual way.
- Check online for updates under iCSconfig > updates or upload a
local file manually by browsing your system.
- Execute the system update iCS V2.6.x by pressing the green install
button
- The log window will be opened automatically.
- Push the orange INSTALL button and follow the messages
- Restart the iCS system in order to apply the new system firmware.
Note that the new iCS version will be displayed after the restart at the
iCS status bar (bottom line).
2. System update from version
2.5.x
The update transforms the partition scheme. It will be performed in a
partitioning step under control of iCS V2.5.x and a system update step
to the latest version.
- Follow the first four steps in chapter one in order to perform the
partitioning step.
- While this step is executed the WEB interface will lose the
connection.
- Please try to re-connect the iCS system after one minute. When the
connection to the WEB interface is established again, you are ready for
the next system update step to iCS version 2.6.x.
- Repeat the steps 3-6 of system update steps in chapter “System
update from version 2.6.x or higher” above in order to update the iCS
firmware.
3. System update from version
2.4.1
- Perform a firmware update to the latest iCS version 2.5.x in the
same manner as the five update steps of the first chapter. The only
difference is, that the update file here is iCS V2.5.x
- Afterwards perform the update steps of chapter two.
4. System update
from version 2.4.0 and lower