Home > SYSTEMS > MMC-Controller

go back
SYSTEM-MMC

MMC-Controller

20/24 Bit MMC-System Controller

The universal MICC interface board connects the analog ports of MMC HV modules in 3U cassettes (CPS, DPS, EPS) with digital standard interfaces. This allows to integrate devices with an analog-I/O into computer-based control systems. The high resolution of analog inputs and outputs allows a very precise control of current and voltage of connected devices.

It is possible, for instance, to control and measure an output voltage of 1,000 V with a resolution lower than 10 mV. For DPS cassette modules it is possible to switch polarity via this interface. The controller supports following functions:

  • set and read of voltage/current/ramp,
  • HV on/off,
  • INHIBIT,
  • electronically switch polarity for DPS


  • CAN, USB and Ethernet interfaces
  • 16 analog output with 20 Bit DAC
  • 32 analog inputs with 24 Bit ADC
  • 24 digital I/O ports
  • global safety loop
  • multiple MICC chainable via CAN

model MICC
interfaces
dim. (l/w/h) 160mm / 4HP / 3U
options
manual MICC_SCPI_eng.pdf
datasheet see configurations
image iseg_MICC.png
current new planned discontinued
group
model
interfaces
dim. (l/w/h)
image
software
manual
MICCMICC
itemcode: MICCETH
ETHERNET | CAN160mm / 4HP / 3Uiseg_MICC.pngTerminal CAN HV Control SCPI Control MICC Config. HV OPC serverMICC_SCPI_eng.pdf
code description
Note: manuals and datasheets can be downloaded under configurations-tab