| |

Home > AC/DC > PPS

go back
AC/DC

PPS

Potential free digital controlled AC/DC High Voltage Power Supply


Flyer Download (PDF)

PPS devices are digitally controlled AC driven high voltage power supplies with high power density at best output characteristics. The processor controlled supplies can flexibly be adapted to any kind of application by configuring many options. Due to an additional external 24V supply it is possible to maintain communication with the control unit and to continue measuring output current and output voltage, even if the mains voltage is disconnected/ switched off. Digitally controlled output parameters, small ripple and noise and stored energy, more than 93% efficiency and almost loss free switching of semiconductors makes PPS devices the most advanced AC/DC HV power supply for industrial and research applications.

  • Potential free high voltage outputs
  • Two high voltage outputs (positive and negative)
  • Best control characteristics
  • Multiple interface options
  • Capacitor charger option (CLD)
  • Short circuit proof
  • ARC management (ultrafast ARCpro optional)
  • Very low noise, very low EMI
  • Forced cooling internal (air inlet front, air outlet rear)
  • Parallel operation for power increase
request information

model PPS 10kW new
ch. 1
Vnom 1kV - 5.5kV
ripple & noise -
HV connector LEMO
interfaces USB RS232 CAN IEEE488 ETHERNET AIO SPS
options ARC CLD EOA FP
manual see configurations
datasheet see configurations
image PPS series product photo
current new planned discontinued
group
model
Vnom
Inom
Pnom/ch
Vin
@iV
ch.
polarity
interfaces
HV connector
dim. (l/w/h)
image
options
PPS 10kW newPP 10 109p
itemcode: P010109p
configure now
1kV10A10kW400V - 480V - 1positivUSB RS232 CAN IEEE488 ETHERNET AIO SPSLEMO500mm / 19" / 4UPPS series product photoARC CLD EOA FP
PPS 10kW newPP 20 508p
itemcode: P020508p
configure now
2kV5A10kW400V - 480V - 1positivUSB RS232 CAN IEEE488 ETHERNET AIO SPSLEMO500mm / 19" / 4UPPS series product photoARC CLD EOA FP
PPS 10kW newPP 30 348p
itemcode: P030348p
configure now
3kV3.4A10kW400V - 480V - 1positivUSB RS232 CAN IEEE488 ETHERNET AIO SPSLEMO500mm / 19" / 4UPPS series product photoARC CLD EOA FP
PPS 10kW newPP 40 258p
itemcode: P040258p
configure now
4kV2.5A10kW400V - 480V - 1positivUSB RS232 CAN IEEE488 ETHERNET AIO SPSLEMO500mm / 19" / 4UPPS series product photoARC CLD EOA FP
PPS 10kW newPP 50 208p
itemcode: P050208p
configure now
5kV2A10kW400V - 480V - 1positivUSB RS232 CAN IEEE488 ETHERNET AIO SPSLEMO500mm / 19" / 4UPPS series product photoARC CLD EOA FP
PPS 10kW newPP 55 188p
itemcode: P055188p
configure now
5.5kV1.8A10kW400V - 480V - 1positivUSB RS232 CAN IEEE488 ETHERNET AIO SPSLEMO500mm / 19" / 4UPPS series product photoARC CLD EOA FP
PPS 10kW newPP 55 608p
itemcode: P055608p
configure now
5.5kV6A10kW400V - 480V - 1positivUSB RS232 CAN IEEE488 ETHERNET AIO SPSLEMO500mm / 19" / 4UPPS series product photoARC CLD EOA FP
code description
ARC ARC management
CLD capacitor charger
EOA extended operating area
FP with front panel operation

configuration tool

This tool helps to select a suitable iseg device and to combine suitable options and interfaces into an product that can be ordered with a final article number. It can also be used to decode known item codes.
 
search
 
reset

Product preview

Note: manuals and datasheets can be downloaded under configurations-tab