| model | MICP |
|---|---|
| interfaces | CAN USB ETHERNET |
| dim. (l/w/h) | 160mm / 4HP / 3U |
| options | |
| manual | see configurations |
| datasheet | see configurations |
| image |  |
MMP-Controller
20/24 Bit MMP System Controller
The universal MICP interface board connects the analog ports of PHQ photomultiplier supply with a digital standard interface. This allows to integrate devices with an Analog-I/O into computer-based control systems. The high resolution of analog inputs and outputs allows a very precise control of current and voltage of connected devices.
It is possible, for instance, to control and measure an output voltage of 1,000 V with a resolution lower than 10 mV. Each MICP board is able to control, monitor and supply 16 photomultiplier supplies of type PHQ.
- CAN, USB and Ethernet interfaces
- 16 analog output with 20 Bit DAC
- 32 analog inputs with 24 Bit DAC
- 32 digital I/O ports
- functions: set and read of voltage/current/ramp, HV on/off, INHIBIT, electronical polarity switching for DPS global safety loop
- multiple MICP chainable via CAN
current
new
planned
discontinued
group | model | interfaces | dim. (l/w/h) | image | software | manual |
|---|---|---|---|---|---|---|
| MICP | MICP itemcode: MICP configure now | CAN USB ETHERNET | 160mm / 4HP / 3U | |
| code | description |
|---|
configuration tool
This tool helps to select a suitable iseg device and to combine suitable options and interfaces into an product that can be ordered with a final article number. It can also be used to decode known item codes.
Note: manuals and datasheets can be downloaded under configurations-tab