High Voltage for Solid-state detectors

Particle Detectors based on semiconductive materials, such as Silicon-, Germanium- and Cadmium zinc telluride-detectors and Silicon Photomultipliers are used for the proof and measurement of ionizing radiation. Depending on design and application of the detector, high voltage power supplies with high stability, low noise and specific protective features are necessary. iseg staff has a longstanding experience in design and manufacturing of high voltage power supplies for semiconductive particle detectors and is offering standard products as well as customer specific supplies.

High Voltage for Solid-state detectors: iseg BPS series

The BPS is a small DC/DC converter which can be mounted and soldered on PCBs. The output voltage is controllable with either a potentiometer or an analog control voltage. The patented resonance converter technology and moulded metal box shielding guarantee lowest electromagnetic interference and low ripple and noise.
iseg_BPS-series.png

High Voltage for Solid-state detectors: iseg CPS series

CPS modules are highly stable analog controlled high voltage power supplies. They are available as compact metal box or system capable in 3U Eurocassette standard. Modules of the CPS series can be used as standalone DC/DC converters, combined to multichannel AC/DC supply in a THQ series or integrated in a modular MMC system.The output voltage is controllable via analog interface with either a potentiometer (internal reference voltage) or an input analogue control voltage. To protect the connected load the modules are equipped with INHIBIT, current and voltage limits.
CPS series

High Voltage for Solid-state detectors: iseg DPS series

The DPS series includes high voltage power supply modules with output voltages up to 6 kV in a compact and easily mountable housing. The maximum power is 12 W, polarity is switchable. The HV output is finished by HV cable or by SHV connector. The version the supply and control voltages are connected either via a D-SUB 9 connector or H15 connector (3U cassette).

An internal reference voltage can be used to control the output voltage with help of an external potentiometer. Analog I/O is provided for remote monitoring and control. To protect connected loads hardware limits for voltage and current can be defined. Our patented resonance converter technology and the metal box shielding guarantee lowest EMI.
iseg_DPS-series.png

High Voltage for Solid-state detectors: iseg EBS series

The bipolar EBS distribution modules are multichannel high voltage power supplies in MMS and MMC system (Eurocard format) with full 4-quadrant capabilities. The EBS can be used as bipolar current sink and source, which perfectly covers requirements of electron optical systems or capacitive loads. The EBS is built in common floating ground principle to reduce voltage noise level. With up to 16 channels each single channel has an independent voltage control up to 3 kV channel-voltage-difference. The EBS configuration of output voltage and current can be customized on request. The module is made of high precision components as 24 bit ADC and 20 bit DAC and provides comprehensive security features. The EBS 3U is specially developed for MMC crate ECH 12A. There it can be combined with MMC 3U modules for special purpose like ion beam applications.
iseg_EBS-series.png

High Voltage for Solid-state detectors: iseg EDS series

The cost effective EDS distribution modules are multichannel high voltage power supplies in MMS-system (Eurocard format). It is available as Standard version and as Low Cost version with reduced resolution and precision of current measurement. The EDS is comes with common floating ground to reduce voltage noise level.

With up to 48 channels each single channel has an independent voltage control. The module is made of high precision components as 24 bit ADC and 20 bit DAC and provides comprehensive security features.
EDS

High Voltage for Solid-state detectors: iseg EHQ series

The established EHQ single channel HV module is cased in compact iseg MME-system (Eurocard format). EHQ series HV supplies are front panel controllable with a precise 10-turn potentiometer for voltage setting and a LCD to display voltage or current. For remote control EHQ is equipped with many interfaces (USB, RS232, CAN, optional analog I/O). The voltage ramp is hardware fixed and can be changed in remote operation. The high voltage output is short circuit and overload protected, an INHIBIT input over external digital signal switches the HV off.
iseg_EHQ-series.png

High Voltage for Solid-state detectors: iseg MMC Crates series

ECH crates of 124/128/12A in MMC design are ideally suited for mobile and stationary usage by it´s compact construction. In MMC system crates analog controlled DC/DC converters of CPS, DPS or EPS series can be digitally controlled by the MICC crate controller. Thereby versatile HV supply systems can be composed, which are either powerful (EPS), highly precise (DPS) or providing a cost saving coverage of a wide HV range (CPS).
iseg_ECH124-filled.png

High Voltage for Solid-state detectors: iseg MME Crates series

The crate series ECH 104/134/108/138 stands for iseg MME systemcrates in half 19“ or 19“ racksize, 3U height and integrated 200 W power supply. By the compact form factor they are suitable for desktop or mobile use. 4 or 8 MME slots are available. The crates can either be equipped with 4 or 8 separate RS232 connectors or with a common CAN interface connector.
iseg_ECH104.png

High Voltage for Solid-state detectors: iseg MMS Crates series

ECH 242 / 224 / 244 / 238 is the classic iseg crate series in MMS system. It is available as desktop version with 2 or 4 module slots or in 19“ full-size rack format with 8 module slots. With 1,200 W power, optional integrable fan-unit and optional UPS unit the ECH 238 is perfectly prepared to reliably handle demanding HV supply tasks. The crates can be clustered and remotely controlled. The iseg ECH 5xA crate series provides 10 iseg multichannel module slots, can be equipped with Low- and High Voltage modules (version dependend) and work with CC24, CC23 or Mpod Controller. With two external electrical isolated CAN lines, powerful 1,200 W and optional UPS.
iseg_ECH-MMS-series.png

High Voltage for Solid-state detectors: iseg NHR series

The iseg NHR modules are multi-channel high voltage power supplies in 1/12 NIM standard cassette format. The NHR provides up 4 channels, each with an independent voltage and current control and electronically reversible polarity. The 6kV channel provides a maximum versatility: with three electronically switchable HV-generation modes it can supply 4mA up to voltages of 2kV, 3mA up to 4kV and 2mA up to 6kV. Alternatively the NHR can be equipped with cost efficient 2kV/6mA channels. Several NHR modules can be daisy-chained by CAN and controlled with a single USB connection or by an iseg iCS system. The hardware is made of best components such as 24 bit ADC and 20 bit DAC, the approved front panel control of the NHS series with TFT display allows userfriendly intuitive operation. The  NHR is equipped with a comprehensive set of security features like overvoltage and short circuit protection, hardware limits and much more.
NHR

High Voltage for Solid-state detectors: iseg NHS series

The iseg NHS modules of this series are multi channel high voltage power supplies in 1/12 NIM standard cassette format. With up to 6 channels each single channel has an independent voltage and current control. By offering different configurations and options this module perfectly covers various types of applications such as detector supply, experimental setup or lab use.

Several NHS modules can be daisychained by CAN and controlled with a single USB connection or by iseg iCS system. The module is made of best components as 24 bit ADC and 20 bit DAC, an excellent front panel control with TFT display plus comprehensive security features.
NHS

High Voltage for Solid-state detectors: iseg SHR series

The new SHR series represents standalone High Precision HVlabratory SMU - Source Measuring Unit - equipped with thefinest iseg HV generation technology and iCS control system.The SHR provides up to 4 HV-channels, each with an independentvoltage and current control and reversible polarity.A completely new developed flexible 6kV channel provides amaximum versatility:With three electronically switchable HV-generation modes it cansupply 4 mA up to voltages of 2 kV, 3 mA up to 4 kV or 2 mAup to 6 kV. Alternatively the SHR can be equipped with costefficient 2kV/6mA fixed channels.A high quality 4.3“ TFT shows detailed information and canbe controlled by capacitive touch. All comprehensive features likelogging, graphical display and customer specific plugins are alsoavailable by the precise jog-wheel and buttons.
iseg_SHR.png

High Voltage for Solid-state detectors: iseg THQ series

The inexpensive and robust desktop high voltage power supplies are equipped with proven high voltage modules of the CPS, DPS and EPS series. The units are available with either 1, 2 or 3 high voltage channels in many variations and combinations. The output voltage is controlled via the 10-turn potentiometer, the USB interface or the analog I/O. Output voltage and current is displayed on a 2 line LCD per channel, located on the front panel.
iseg_THQ-series.png

High Voltage for Solid-state detectors: iseg VDS series

The cost effective VDS distribution modules are multichannel high voltage power supplies in VME standard. The VDS is built in common floating ground principle to reduce voltage noise level. With up to 24 channels each single channel has an independent voltage control. The module is made of high precision components as 24 bit ADC and 20 bit DAC and provides comprehensive security features.
iseg_VDS-series.png